Existing DCC++ Commands used by LccFusion

Collaboration diagram for Existing DCC++ Commands used by LccFusion:

---

WRITE CONFIGURATION VARIABLE BYTE TO ENGINE DECODER ON MAIN OPERATIONS TRACK

<w CAB CV VALUE>

writes, without any verification, a Configuration Variable to the decoder of an engine on the main operations track

• CAB: the short (1-127) or long (128-10293) address of the engine decoder
• CV: the number of the Configuration Variable memory location in the decoder to write to (1-1024)
• VALUE: the value to be written to the Configuration Variable memory location (0-255)

returns: NONE