🧱 Builder’s Guides

Welcome to the Builder’s Guides— the hands-on workspace for assembling and preparing the hardware that powers your LCC Fusion layout. Whether you’re soldering components, placing connectors, or preparing breakout boards, this section walks you through each step of the physical build process.

If you’re just getting started, begin with the Hardware Assembly Guides. Then, refer to card-specific or breakout-specific assembly instructions as needed.

---

🛠️ Assembly Resources

• Hardware Assembly Guides
  Overview of tools, soldering practices, and general PCB handling.

• Card Assembly Guides
  Step-by-step instructions for assembling each logic or controller card.

• Breakout Board Assembly Guides
  Guides for wiring and soldering breakout boards that connect sensors, LEDs, buttons, and more.

---

🔧 Builder’s Resources & Tips

• Builder’s Resources & Tips
  Includes recommended soldering stations, stencils, hot plate settings, wire gauges, and more.

• Gerber Files
  Download ready-to-manufacture Gerber files for every board in the project.

🧰 Most boards are designed for hot plate reflow soldering, with SMD components on one side and optional PTH components on the other. Check each guide for specific part placement and testing steps.