Node_Card Directory Reference

Files
file	AlexaVoiceConfiguredProducer.h [code]
file	AudioConfiguredConsumer.h [code]
file	BsdConfiguredProducer.h [code]
	Producer class for BSD (Block Short Detection) cards.
file	DefaultDeviceSettings.h [code]
	Provides supporting class for saving and restoring the initial state of card settings for use by producer/consumer classes.
file	I2cCardHelper.h [code]
	Common support for I²C-based card producers/consumers: registration, CDI helpers, ID queries, I²C init, and a default consumer handler that routes to drive_pin/drive_pin_ext.
file	I2cPollingHelper.h [code]
	Opt‑in polling engine for producers (header‑only).
file	IoConfiguredPC.h [code]
file	LccNode.h [code]
	Instantiates the LCC Node object that provides access to all Node specific functions (wrapper around OpenMRN and OpenMRNLite)
file	LccNodeAlerts.h [code]
	Provides Node Card alerting and self-monitoring services.
file	LccNodeCardConfig.h [code]
	Supports user define configuration; number of sound cards and players to configure, Node communications and Node ID.
file	LccNodeCardPins.h [code]
	Supports user define configuration; number of sound cards and players to configure, Node communications and Node ID.
file	LccNodeCardRegistry.h [code]
	Manages a registry of IO cards and their information. Invoked by producer/consumers when being instantiated.
file	LccNodeCdi.h [code]
	Provide CDI definition.
file	LccNodeCommons.h [code]
	Provides supporting classes for defining card producer/consumer classes.
file	LccNodeConfig.h [code]
	Supports user define configuration; number of sound cards and players to configure, Node communications and Node ID.
file	LccNodeEventIdViewer.h [code]
file	LccNodeFactoryReset.h [code]
	Handle reseting of the Node specific information back to factory settings.
file	LccNodeI2c.h [code]
	Handle I2C connections to remote I2C enabled devices.
file	LccNodeIdManager.h [code]
	Manages LCC NodeID with support for various formats.
file	LccNodeMacros.h [code]
	Macros used in support of generating consumer and producer objects.
file	LccNodeMenu.h [code]
file	LccNodeMri.h [code]
file	LccNodeNowBridge.h [code]
	ESP_NOW to GridConnect Bridge for processing GC packets between ESP_NOW (ESP32 wireless) and GridConnect.
file	LccNodePC.h [code]
	Instantiates the consumer and producer related object(s) For each of the producer / consumer classes, add a section below to invoke the class. Use #define controls to control whether or not to instantiate a class. Provides a means to control the amount of memory being consumed for various configurations.
file	LccNodePCcdi.h [code]
	Defines the main CDI elements for all consumers.
file	LccNodePersistentStorageManager.h [code]
	Instantiates the LCC Node Persistent Storage Manager that handles LCC Node information in SPIFFs.
file	LccNodePowerMonitor.h [code]
file	LccNodeSerialMonitor.h [code]
	Provides serial, Bluetooth, and WebSerial console monitoring for an LCC Node.
file	LccNodeSlcanSerialBridge.h [code]
	Bridge for translating and forwarding CAN frames between GridConnect and Slcan serial formats.
file	LccNodeUtils.h [code]
	LccNode library functions.
file	LccNodeVars.h [code]
file	Logics.cpp [code]
file	Logics.h [code]
file	NeoPixelConfiguredConsumer.h [code]
	Consumer class for LCC Node Card NeoPixel outputs.
file	Node_Card.ino [code]
	LCC Node and examples of IO boards.
file	node_mainpage.h [code]
file	NodeCardIoConfiguredPC.h [code]
	Manages up to 8 configurable I/O lines for a Node Card, supporting direct or breakout board connections.
file	OutputConfiguredConsumer.h [code]
	LCC consumer for ON/OFF control of MCP23017 GPIO outputs on one or more IO Cards.
file	SensorConfiguredProducer.h [code]
	LCC producer for multiple digital sensor types connected via Sensor Cards.
file	ServoConfiguredConsumer.h [code]
	LCC consumer for controlling servos via one or more Servo Cards.
file	SignalLamp.h [code]
file	SignalMast.cpp [code]
file	SignalMast.h [code]
file	SignalRule.cpp [code]
file	SignalRule.h [code]
file	SignalTrackCircuit.cpp [code]
file	SignalTrackCircuit.h [code]
file	SoundConfiguredConsumer.h [code]
	Consumer class that uses CDI configuration to support generating I2C messages based on LCC events received. Supports connecting sound devices (DFPlayer MP3 devices) either locally to the LCC Node HW or remotely using I2C. For remote I2C connections, a Sound Card device running an ESP32 is required, which acts as an I2C master device. The I2C (text) messages are received by a Sound Card's ESP32, which then uses local UART serial to send commands to the player device.
file	SoundPlayerDevice.h [code]
	Process request to a DFPlayer (mp3) device connected using software serial UART or I2C.
file	TurnoutConfiguredPC.h [code]
	Manages turnout control and status for one or more Turnout Cards using an I2C MCP23017 expander.
file	UodConfiguredProducer.h [code]
	Producer for UOD sensor cards with adaptive two-gear polling.